DECK BUILDS & REPAIR IN MURRAY & SALT LAKE VALLEY, UT

Utah's mountains and wide-open backyards were made for outdoor living. MK HomePro builds and repairs decks throughout Murray, Midvale, West Jordan, and the greater Salt Lake Valley — from ground-level platform decks to elevated two-story structures, in composite and pressure-treated wood, built to last the hard Utah winters and hot summers alike.

Outdoor Living Starts with a Solid Deck

Utah homeowners spend serious time outdoors, and a well-built deck extends your livable square footage at a fraction of the cost of an indoor addition. A quality deck also adds measurable resale value — buyers in Salt Lake Valley consistently pay a premium for homes with functional outdoor space. Whether you're envisioning a simple 12×16 platform off the back door or a multi-level entertainment deck with built-in railings, MK HomePro has the experience to build it right the first time.

We've completed deck projects across Murray, Midvale, West Jordan, South Jordan, Riverton, Herriman, Bluffdale, Draper, Sandy, Cottonwood Heights, Taylorsville, West Valley City, South Salt Lake, Holladay, and Salt Lake City. Our 88+ completed jobs and 100% satisfaction record speak for themselves.

Deck Services We Offer

From new builds to repairs, we handle every phase of deck work:

New Deck Construction

Surface Board Replacement

Railing & Baluster Work

Structural Repairs

Composite Decking

Staining & Sealing

New Deck Construction

We build decks from the ground up — footings, posts, beam and joist framing, decking boards, railings, and stairs. Every new deck we build is framed to code with properly sized structural members and appropriate post footings for Utah's frost depth requirements.

Surface Board Replacement

If your existing deck frame is structurally sound but the surface boards are cracked, rotted, or warped, a board replacement is the most cost-effective solution. We remove and haul away the old decking, inspect the framing underneath, and install new composite or pressure-treated boards. The result looks and feels like a brand-new deck at a fraction of the cost of a full rebuild.

Railing & Baluster Work

Loose, rotted, or out-of-code railings are a safety hazard. We repair or replace wood and metal railings, install new balusters, and ensure everything meets the required 36" or 42" height and baluster spacing standards. We also install cable railing and aluminum systems for a modern look.

Structural Repairs

Rot, insect damage, and years of Utah weather can compromise posts, beams, and joists long before the surface boards show obvious wear. We inspect the full structure, sistering or replacing damaged members as needed, and reinforce connections with modern hardware to bring the deck back to a safe, code-compliant condition.

Staining & Sealing

For pressure-treated wood decks, annual or bi-annual staining and sealing is the single best thing you can do to extend deck life. We power-wash, allow proper drying time, and apply quality penetrating stain for lasting protection against UV and moisture.

Our Deck Building Process

  1. Site Assessment — We evaluate the grade, existing structure (if any), access, and drainage to identify the right foundation approach for your yard.
  2. Design & Estimate — We discuss size, layout, material choices, and railing style, then provide a written, itemized estimate.
  3. Permit Note — Most decks over 200 sq ft or above 30" from grade require a permit in Utah jurisdictions. The homeowner is responsible for pulling permits — we provide all the specs and measurements you'll need to submit your application. We do not pull permits on behalf of owners.
  4. Build — Footings are set, framing goes up, decking boards are installed, and railings and stairs are completed in sequence.
  5. Inspection & Cleanup — We schedule around your inspection timeline, clear all debris and scrap material, and walk through the finished deck with you before calling the job complete.

Pro Tip

Don't skip the permit on a deck that requires one. Beyond the safety benefit, an unpermitted deck can complicate a home sale — buyers' lenders and inspectors routinely flag them, and you may be required to remove or retrofit the structure at your cost. We'll tell you upfront whether your project needs a permit.

Composite vs. Pressure-Treated Wood

The two most common decking materials each have real advantages. Here's an honest comparison:

Factor Composite (Trex-style) Pressure-Treated Wood
Upfront Cost Higher — typically $5–$12/linear ft Lower — typically $2–$5/linear ft
Maintenance Minimal — occasional cleaning only Annual staining/sealing recommended
Lifespan 25–30+ years 15–20 years with upkeep
Feel Underfoot Can get hot in direct sun Natural, stays cooler
Splinter Risk None Possible as wood ages
Best For Low-maintenance, long-term value Budget-conscious builds, painted/stained looks

Our labor rate is approximately $65/hr and all materials are itemized separately on your estimate — you'll know the cost of every board, fastener, and post bracket before we break ground. Call (801) 564-7036 or email contact@mkhomepro.com to schedule your free estimate.

Frequently Asked Questions

How long does a new deck take to build?

A straightforward ground-level deck (12×16, no stairs, simple railing) typically takes 2–4 days of build time. Larger, elevated, or more complex decks with multiple levels or custom railing run 1–2 weeks. Material lead times — especially for composite boards, which are sometimes special-ordered — can add a few days to the front end. We give you a realistic build schedule in your written estimate.

Do I need a permit for a deck in Utah?

In most Utah cities, a permit is required for decks that are 30 inches or more above grade, or larger than 200 square feet. Requirements vary by municipality — Murray, West Jordan, Sandy, and Salt Lake City each have slightly different thresholds. We'll help you understand what applies to your specific project, but the permit is the homeowner's responsibility to obtain. We provide all the technical documentation you need for the application.

Composite or pressure-treated — which is better?

It depends on your priorities. If you want the lowest upfront cost and don't mind annual maintenance, pressure-treated wood is a solid, proven choice. If you want a set-it-and-forget-it deck that looks great in 20 years with just an occasional wash-down, composite is worth the higher initial investment. We're happy to talk through the numbers for your specific project so you can make the call that makes sense for your budget and lifestyle.

Get a Free Deck Estimate

Ready to build or repair your deck? We serve Murray, Midvale, West Jordan, and all of Salt Lake Valley. Written estimates, no obligation.

Get a Free Quote